Good quality EPDM Waterproof Black Rubber Roofing Flexible Membrane Rubber Roof in Rolls

Description:

SBS/APP waterproof membrane is made of modified asphalt through scientific process with heat transfer oil as carrier.

It has such advantages as no flow under high temperature condition, being soft under low temperature condition, being high flexible and aging resistant.

Thus the flex durability, flexibility and cohesive force of the asphalt is largely improved.

Therefore, the waterproof quality of the buildings improves a lot and service time also prolongs.

Usage:

SBS/APP modified asphalt waterproofing membrane can be widely used for building surface and basement waterproof in industrial and civil engineering, as well as waterproof for subway, cold storage, airport runway and viaduct.

SBS modified asphalt waterproofing membrane is specially suitable to the architecture’s waterproofing in cold area and to the building of unstable constructions, while APP specially is suitable to areas of high temperature and of strong sunshine.

Application areas:

1. Balcony, bathroom, kitchen

2. Tunnels, Industrial roofs

3. Flat and sloped roofs

4. Basements, Foundation and retaining walls

5. Gardens, Bridges

Features and advantages:

1. High impermeability, high tensile strength, high extension coefficient

2. Puncture resistance, tear resistance, anti-corrosion, mildew resistance

3. SBS is suitable for lower temperature area, while APP is suitable for higher temperature area

4. Perfect durability, service life can up to 30 years

5. Flexible install method: Either by heating and melting method, or cold-adhesive method. Either single or multiple layer.

6. No flow, no dripping in higher temperature;

No crack in lower temperature

Installation:

1) Make sure the roof deck smooth, clean and dry (Moisture <9%), then coat the surface of your roof deck with a kind of bitumen paint till dry to start installation.

2) Two ways in installation:

First, heating and melting method—-Heat the PE film of the membrane and roof deck surface by heating and melting method to nearly melted (not flowing), then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

Second, cold-adhesive method—–Pour the cold adhesive homogeneously on the roof deck, the roll the membrane to install it to be fully stick to roof deck.

3) After installation, a full serious inspection is required to make sure no air bubble, no fold, no falling away to guarantee the waterproof life.